1. Home
  2. Vocational Education
  3. VET Board Endorsed Courses
  4. Stage 6 VET Board Endorsed Course Descriptions – 2017
  5. Automotive Body Repair Technology – Certificate III
Print this page Reduce font size Increase font size

Automotive Body Repair Technology – Certificate III

To print this course description, please download the PDF version

Stage 6 Board Endorsed VET Course Description
Endorsed by BOSTES for cohort commencing 2017 (December 2016)

AQF VET qualification: Statement of Attainment towards AUR32116 Certificate III in Automotive Body Repair Technology

Training Package: AUR Automotive Retail, Service and Repair (version 3)

BOSTES course name

Pattern of study

BOSTES course number

Schools Online (Administration) entry advice

Automotive Body Repair Technology (240 hours)

2 units x 2 years

65543

Enter this course number for both Preliminary (Year 11) and HSC (Year 12)

Eligibility: This course is only available to students undertaking a school-based apprenticeship.

Exclusions: Automotive Curriculum Framework

HSC course requirements

Automotive Body Repair Technology (240 indicative hours)

  • the possible qualification outcome is a Statement of Attainment towards AUR32116 Certificate III in Automotive Body Repair Technology
  • accredited for a total of 4 units at the Preliminary and/or HSC level
  • attempt core and/or elective units of competency to a minimum of 240 HSC indicative hours
  • mandatory work placement requirements are met through the on-the-job training component of the school-based apprenticeship.

The requirements for the completion of an HSC VET course are different to the requirements for AQF VET qualification completion. Registered Training Organisations (RTOs) need to ensure that delivery of courses meets HSC course requirements and complies with Training Package rules.

For a course to count towards the HSC program of study, students must satisfy the course completion criteria as required by the Board of Studies, Teaching and Educational Standards NSW (BOSTES). (Refer to the Assessment Certification Examination (ACE) website.) There must be sufficient evidence that the student has:

  • followed the course developed or endorsed by BOSTES
  • applied themselves with diligence and sustained effort to the set tasks and experiences provided in the course
  • achieved some or all of the course outcomes
  • (where applicable) undertaken the mandatory work placement.

Unit credit for the Higher School Certificate

Automotive Body Repair Technology HSC VET courses count as Board Endorsed unit credit for the HSC but do not contribute towards an Australian Tertiary Admission Rank (ATAR).

To facilitate flexibility of VET in the HSC, courses may be delivered as Preliminary, as HSC or as a combination of Preliminary and HSC units.

The HSC credit units will be allocated to students’ Preliminary and/or HSC patterns of study as required.

The pattern of study (BOSTES course number) entered on Schools Online (Administration) should reflect the delivery of the HSC VET course over successive years. For example, delivery of a 240 HSC indicative hour course over two years should be entered as 2 units x 2 years. Students will be credentialled for the HSC credit units entered each calendar year, provided they have satisfactorily completed the course requirements for that calendar year as determined by the school, college or RTO.

Course content

Unit code and title

Status for
AQF VET qualification

HSC indicative hours of credit

AURAEA002
Follow environmental and sustainability best practice in an automotive workplace

core

15

AURAFA008
Interpret and apply automotive repair instructions

core

15

AURASA002
Follow safe working practices in an automotive workplace

core

15

AURETR025
Test, charge and replace batteries and jump-start vehicles

core

10

AURTTK002
Use and maintain tools and equipment in an automotive workplace

core

25

AURVTN003
Remove and store vehicle body components

core

20

AURVTN004
Remove, replace and align bolt-on vehicle body panels and components

core

40

AURVTN016
Repair vehicle body panels using filler

core

35

AURVTW007
Carry out oxyacetylene thermal heating and cutting on vehicle body sections

core

15

AURVTN002
Carry out non-structural vehicle panel repairs

elective – specialist
Group A

25

AURVTN027
Repair vehicle aluminium body panels using filler

elective – specialist
Group A

25

AURAFA004
Resolve routine problems in an automotive workplace

elective – general

20

AURVTA001
Prepare vehicles for customer use

elective – general

10

AQF VET qualification

Qualification packaging rules are contained in the AUR Automotive Retail, Service and Repair Training Package at http://training.gov.au.

In summary, to attain the full AUR32116 Certificate III in Automotive Body Repair Technology students will need to achieve 30 units of competency including:

a) 16 core units of competency

b) 14 elective units of competency:

  • 8 units from one of the Specialist Elective Unit Groups A to C

   of the remaining units required to make up the elective unit total:

  • up to 6 units may be chosen from the Specialist Elective Unit Groups and the General Elective Units listed
  • up to 5 units may be chosen from a Certificate II qualification or above in the AUR Training Package or another endorsed Training Package or accredited course.

Other information

Criteria for the endorsement of Board Endorsed VET courses (VET BECs)

The criteria for endorsement of VET BECs are outlined in the Guidelines for Stages 5 and 6 Board Endorsed VET Courses available on the BOSTES website at www.boardofstudies.nsw.edu.au/voc_ed/board-endorsed-courses.html.

HSC VET course delivery

HSC VET courses can only be delivered by an RTO with the relevant qualification and units of competency on their scope of registration. Scope of registration can be checked at http://training.gov.au.

RTOs offering training programs for the delivery and assessment of Automotive Body Repair Technology HSC VET courses must meet the requirements of the VET Quality Framework, the AUR Automotive Retail, Service and Repair Training Package and the HSC course.

Information about the delivery of HSC VET courses by RTOs other than school system RTOs or TAFE NSW institutes is contained on the BOSTES Assessment Certification Examination (ACE) website.

Non-government schools outsourcing delivery of HSC VET courses to external providers also need to refer to the Registered and Accredited Individual Non-government Schools (NSW) Manual or Registration Systems and Member Non-government Schools (NSW) Manual which are available on the BOSTES website at http://rego.bostes.nsw.edu.au.

HSC work placement requirements

Work placement is a mandatory HSC requirement for this Automotive Body Repair Technology VET course.

Students undertaking HSC VET courses as part of a school-based apprenticeship or traineeship will meet mandatory work placement hour requirements through the on-the-job training component of the school-based apprenticeship or traineeship.

Students’ outside employment (ie not under the auspices of the school) may be recognised towards the requirement for work placement in a VET course (ACE 8051 – Assessment Certification Examination (ACE) website).

Non-completion of work placement is grounds for withholding the HSC course. Schools and colleges are advised to follow the procedure for issuing ‘N’ determinations as outlined on the BOSTES Assessment Certification Examination (ACE) website.

Allocation of HSC indicative hours of credit

Units of competency drawn from Training Packages are not defined in terms of duration. The amount of time required by individual students to achieve competency will vary according to their aptitude and experience. Where a training program is designed for delivery by an RTO, the RTO will specify the length of the training program according to the delivery strategies and/or curriculum resources chosen.

However, for the purposes of the HSC, VET courses must be described in terms of their indicative hours. For this reason, indicative hours for unit credit towards the HSC have been assigned to each unit of competency. It is emphasised that the assignment of indicative hours does not imply that all students will fulfil all requirements of a unit of competency within these hours. RTOs may determine that additional or fewer hours are required for the achievement of particular competencies. However, this does not alter the HSC indicative hours allocated, only the delivery hours.

Students may need to spend additional time practising skills in a work environment and completing projects and assignments, in order to fulfil Training Package assessment requirements.

Exclusions

Where there is significant overlap between an HSC VET course and other HSC VET or general education courses, BOSTES has an exclusion between the courses. Exclusions are applied at a course level rather than at the unit of competency level.

Schools should check all course exclusions when determining an appropriate pattern of study for their students.

Course exclusions for Automotive Body Repair Mechanical Technology are detailed on the first page of this course description.

Recognition of Prior Learning (RPL) and credit transfer within VET courses

Students who have current knowledge, skills or experience relevant to a VET course may be granted credit towards the course requirements.

Arrangements for RPL and credit transfer within VET courses, including processes, application form and examples of possible scenarios, are detailed on the BOSTES website at www.boardofstudies.nsw.edu.au/voc_ed/rpl.html.

School-based apprentices and trainees

Information regarding provision for school-based apprentices and trainees within the HSC is available on the BOSTES website at www.boardofstudies.nsw.edu.au/voc_ed/apprenticeships-traineeships.html.

Information on requirements and arrangements for NSW school-based apprenticeships and traineeships is available at www.training.nsw.gov.au/individuals/apprenticeships_traineeships/school_based/index.html.

Students with special education needs

Students with special education needs may access a VET course in one of two ways:

  • by undertaking the course under regular course arrangements, or
  • by undertaking selected units of competency within the course that have been identified through the collaborative curriculum planning process.

For more information, see the VET Courses and Students with Special Education Needs fact sheet, as well as Collaborative Curriculum Planning advice, on the BOSTES website.

Students in Years 9 and 10 (Stage 5)

In certain circumstances students in Years 9 and 10 (Stage 5) may access Stage 6 VET courses. Further information is available on the BOSTES website at www.boardofstudies.nsw.edu.au/voc_ed/stage-5.html.

Print this page Reduce font size Increase font size